Labware Definitions: container cross-section & carrier type (PLR)

[CamilloMoschner]

Link update after forum renaming:

PLR Carrier z-Height Issue

In the example above: [image] …the thickness of container/well base is 15.5 mm (height plate top to bottom) . - (15.1 mm [top of well to bottom of well] - 0.6 mm [elevation of well above plate top] =) 14.5 = 1.0 mm (distance of bottom of well to bottom of plate) . - 0.5 mm (dz → distance of container/well shell bottom to plate bottom) = 0.5 mm Yep… a simple well is actually that complex No, if the dz is indeed above 5.15mm then the plate wall simple sits on the middle le…